به وب سایت دانش پرتو نقش جهان خوش آمدید.

تماس با کارخانه

031-42693524-7

شنبه تا پنجشنبه

9:00am - 6:00pm

آدرس ایمیل

info@dpnjco.com

We are the first producer of large-scale molds in Iran

We are the first producer of large-scale molds in Iran

 
 
The CEO of Danesh Perto Naqsh Jahan said: As the first producer of copper sections in Iran, we have been able to achieve 70% quality and global standards. In order to achieve 100% quality, in addition to raw materials and modern machinery, the support of the government and large companies is also necessary because with their support, the highest level of quality can be reached in the long term.
 
Engineer Majid Rahimi, in an interview with the reporter of "Felzat Online" news and analysis site, stated: We are a knowledge-based company that has a history of nearly 21 years in the field of industrial parts production in two branches of casting copper-based metals and professional machining of parts. We started the technical knowledge base. At Danesh Perto, we are able to produce single copper parts weighing up to 6 tons. Most of our personnel are educated and academic people, and since the establishment of the collection, we have put knowledge in line with the industry. It can be said that this collection is one of the few collections that has taken steps in the field of research, development, guarantee of parts and optimizing the production process by establishing the ISO 9001-2008 standard.
He added: The main production parts of our collection are related to industrial companies of the mother country, such as Zob Ahan, Mobarake Isfahan Steel, Fars Cement, Khuzestan Steel, Yasouj Cement, Rizal Petrochemical and Khorasan Steel, and we also support copper spare parts of private companies. We are responsible. The production parts of the collection are mostly designed for 250 ton and extra heavy arc furnaces, and due to their cooling and direct exposure to heat, our parts must have high thermal and electrical conductivity that can easily carry out heat transfer operations. Improve furnace conditions. Many of these parts save arc furnace melting time. A clear example of this can be seen in steel complexes, where by installing our production parts in the furnaces of that complex, the melting time has been reduced by half an hour, and also in the energy sector, it has reduced the consumption of electricity and energy, both in terms of usage and cost.
 
We are the first producer of large-scale molds in Iran: The CEO of Danesh Perto Naqsh Jahan stated: A large company like Shahid Bahonar Kerman is active in the field of production of various levels. But the largest cross-section that it is able to produce in the rolling section and slab parts covers a width of 66 cm and has recently reached the production stage of a width of 80 cm; However, Bartu Knowledge Group also produces molds and sheets up to one meter and 20 cm wide. In fact, we can say that we are the only production company of this type of sheets and molds in the country.
 
Regarding the domestic and foreign sales of Danish Perto products, Engineer Rahimi stated: In the past years, most of the parts that we, as the first manufacturer, are making, were supplied through imports; For example, the longitudinal mold plate that we have now mass produced used to be purchased from KME in Germany. Due to the quality and as the first producer in some parts, the domestic sales of our products are in good condition; But until today, we were unable to export because European countries consider us as third world and do not trust the quality of our products, so they do not give us an opportunity to supply products and they prefer to sell their products rather than buy products from us. We do not claim that we have reached 100% quality, but we have reached 70% of the quality of KME Germany, which has shown significant progress in the current situation.
 
He further added: In order to achieve 100% quality and European standards, we need the support of large companies that cooperate with us so that they trust us and buy and consume our manufactured parts, also in terms of We don't have any problem with the capital that we can increase the quality of products day by day with the help of modern machines, high-quality raw materials and modern knowledge, and of course, this amount of progress cannot be achieved overnight.
The type of raw materials has a direct effect on the quality of products: The CEO of Danesh Perto Naqsh Jahan Company noted in relation to the factors affecting the quality of the products:
First of all, the percentage of purity of the raw materials has a great impact on the quality of the final product. We use the copper cathode of the National Copper Company with a grade of 99.99%, which is the best type of copper. It can be said that the purity percentage of raw materials has a hundred percent and direct impact on quality. The more the system of a factory is moved towards becoming more mechanized and modern, it helps to increase the quality of its parts and products, and in this case, we tried to move towards mechanization.
Engineer Rahimi reminded: "We have sought facilities and support from the presidential institution, government bodies and the Innovation and Prosperity Fund to expand and modernize the collection, so that we can buy new machines and by increasing the quality of products and starting exports, we can contribute to the growth of the country's economy. to dedicate According to the plan of the next five years, Danesh Perto Naqsh Jahan Company is on the path with the prospect of expanding production and starting the export of high-tech copper parts. Due to the production and supply of raw materials with a high percentage of purity inside the country, our products have an extremely high added value, and this indicates that we have a growth path ahead in the production of copper parts.
In the end, he said: There are many problems in our industry; However, the imposition of sanctions has benefited the producers and us, and on the other hand, it has created empathy between the consumer and the producer sector, which in the continuation of these interactions has seen an acceptable progress in the industry.

نظرها (0)

هنوز نظری ثبت نشده است .

ارسال نظر جدید

تماس باما

031-42693524-7

آدرس ایمیل

support@gmail.com

تماس باما

شما می توانید در ساعات 8 صبح الی 1 بعدازظهر و از ساعت 2 بعدازظهر الی 5 به وقت ایران با ما تماس بگیرید .